User Manual

INSTRUCTIONS

Read through this entire instruction manual before using the FlinQ 4-in-1 Trimmer

Set. We're dedicated to bring you well-designed products that make living fun and

easy. We stand behind all our products and warrant this to be free from defects in

workmanship and materials for 1 year from the date of purchase

HOW TO USE THE TRIMMER

CHARGING

1. Fully Charging: 10-12 hours

2. Rating Voltage: AC220-240V(50-60Hz)

3. Close the power switch. Please insert the plug into the power socket. The indicator will

flash if the trimmer is charging.

INSTRUCTIONS FOR HEAD REPLACEMENTS

To change attachments, hold the trimmer body with the switch side facing towards

you. Turn the attachment and pull off. Position the replacement attachment at the top of

the trimmer body, then push down and attach.

USING THE TRIMMER

Remove blade cap. Slide the switch to the "ON" position. Carefully place the blade of the

trimmer to your face to cut nose hairs.

Use the same procedure for trimming your ears, sideburns and evebrow hairs or beard.

(A) NOSE/EAR TRIMMER

1. The Nose Trimmer is designed to remove unwanted hair from the nose or ear areas.

2. Gently approach the area to be trimmed. Never force the Nose Trimmer into nose or

ear cavities as this can result in injuries.

3. If you experience any pain or discomfort when using this product STOP using it

immediately.

4. Always clean the trimmer after use and use the cap to protect the Nose Trimmer head.

(B) EYEBROW TRIMMER

You can use this attachment for trimming unwanted eyebrow hairs, fine facial and ear

hair, or any stray body hairs.

You can use this attachment for smaller areas such as hairlines and sideburns. Hold the

trimmer so the shaver screen gently touches your skin. Avoid holding the trimmer at an

angle. This will distort the screen and may cause some skin irritation.

(D) BEARD TRIMMER

You can use this attachment to shave your beard slowly.