User's Manual

FlightScope User Manual
E19-WA082 Issue A5_7 Copyright EDH 2007-2011
Page 94
S ENSOR F IRMWARE U PDATING
This section describes the procedures to update Sensor firmware.
CAUTION
Sensor firmware programming is a critical task
that requires the power supply and USB
connections to be uninterrupted while in process.
Do not run this process under battery power.
1. With the sensor connected and switched on, open the Firmware Writer
program.
2. After the application has opened click on Configure Devices on the
welcome screen.
3. Select the sensor. Only one sensor should be connected when
programming firmware, so that a wrong selection is not made.