User's Manual

FlightScope User Manual
E19-WA082 Issue A5_7 Copyright EDH 2007-2011
Page 92
Host lists the IP address used for wireless connection to the FlightScope. The
standard setting is 192.168.2.1
Port specifies the port number used for wireless connection to the
FlightScope. The standard setting is 5100
Environment Settings
Detection Mode
Select Indoor mode when ball flight is below approx. 20 meters (60 ft.).
Select Long Indoor mode when ball flight is above 20 meters (60 ft.), but a
net or other arresting device is used to restrict ball flight (e.g. at a trade fair
hitting area)
Select Outdoor mode when ball flight is unrestricted, e.g. on a golf course or
driving range with no nets.
Sensor to Tee distance
Enter the distance from the sensor’s face to the tee/hitting spot.
Tee surface height
Enter the height of the tee surface ( not the Ball Tee ) above the surface on
which the FlightScope is placed.
Altitude
Enter the altitude where FlightScope is used, e.g. coast, etc.
Some devices allow “automatic” altitude setting. Set On if available.
Personal Settings
Handedness
Enter Right or Left hand.
Measurement System
Enter Metric or Imperial units to be displayed.
Accept Shot
Set how shot measurements will be accepted.
About
Displays FlightScope software version information.