User's Manual

FlightScope User Manual

Page 63

Ready/Idle

The Ready/Idle indicator (right side) indicates if the

sensor is active (ready) or inactive (idle).

A green icon indicates that the sensor is active and

ready to measure the next shot.

When the sensor is not measuring (idle) the icon is

blue. A gray icon indicates that the sensor is not

connected.

Battery Level

The Battery Level indicator shows the approximate

amount of charge available in the batteries.

NOTE –battery level indication is approximate as it is

strongly dependent on the way in which the

FlightScope is used as well as environmental factors

(hot or cold, etc.).

Tooltips

Place/Hover the mouse over any of the sensor status indicators to see a

short description of the indicator.

Club Type and Roll/Tilt indicator:

Click this indicator to set the club (D: Driver, W: Wedge, I: Iron) you would

like to optimize for. The indicator also displays the sensor’s tilt and roll

angles. The user is warned when the sensor is not in the optimal tilt range or

roll range. When the roll angle is within an acceptable range, only the tilt

angle is displayed.