User's Manual
FlightScope User Manual
Copyright EDH 2007-2011 E19-WA082 Issue A5_7
Page 23
Setup Wizard
NOTE
Do set-up at least the first time the system is
used.
The Setup Wizard is a step-by-step procedure to be followed before using the
FlightScope. It can be skipped if the set-up remains unchanged between use
events (e.g. if it is a fixed hitting cage installation), but must be updated if
the set-up changes (e.g. if the system is used at different locations).
The Setup Wizard can be started from the Main screen menu or from the
Advanced Settings (F10) menu.
NOTE
Follow all Setup Wizard steps to set the system correctly.
Step-by-step procedure
Setup 1. Connect the sensor to the PC and power on.
Setup 2. Click Open to select the sensor to connect to. Click Refresh to
update list of devices connected.
When the sensor is successfully connected the Port Status and Sensor Status
on the top right of the screen icons will appear dark blue as follows:
Click Next to proceed.