User's Manual
FlightScope User Manual
E19-WA082 Issue A5_7 Copyright EDH 2007-2011
Page 22
PC
O
PERATION
Running the software
The FlightScope software has been designed for “ease of use”.
Ensure that the sensor power is switched on. (The sensor may be left
permanently powered on)
• Place the Computer near the Sensor within reach of the
Communications Cable (USB) (if used). Connect the cable to the
Sensor as well as a USB port on the Computer, and start up the
Computer OR
• If used wirelessly, make sure the wireless connection is working.
• Click the FlightScope icon on the desktop to start the software.
o If the computer is connected to the internet, the software
checks at startup if a newer software version is available.
This automatic check can be disabled (F10->Help->”Check
for updates on startup”)
o Updates can also be forced by F10->Help->”Check for
updates”
• On the Main screen the following selections are available:
o Club Comparison, Player Comparison, Ball Comparison, Play
mode, and Setup Wizard
• The following additional controls are available at the bottom of the
screen: User Manual, Advanced Settings and Exit
Startup Screen