User's Manual

SYMPTOM
POSSIBLE CAUSE & REMEDY
Shot is not
displayed
Check that the correct mode e.g. ‘Indoor’ or
‘Outdoor’, is selected.
Check that the sensor is switched on and posi-
tioned correctly behind the tee from which the
shot is played.
Ensure that the connection between your PC
orTablet and the sensor is set up and
connected.
Sensor not
connecting/ed
Make sure that the sensor is switched on, and
check that the communications indicator is
flashing.
Check the cable connection, as applicable.
Use the PC or Tablet’s Setup Wizard or
Connection tools to connect to the X3, if not
connected.