User's Manual

Charging the X3 to full capacity takes up to 10 hours using the
supplied power adapter.
1. Connect the included power adapter to a wall outlet and
plug the power lead into X3 power connector.
2. The battery indicators will show the battery level in BLUE
(see LED Indicators – Battery).
NOTE:
Charging time is approximately 8-10 hours
Contact Support at FlightScope if battery needs replacement
Battery Safety and Care
Don’t attempt to replace the X3 battery yourself. The X3 battery
should be replaced only by an authorized FlightScope Repair
Center.
A defective or end of life battery must be recycled or disposed of
separately from household waste.
Do not burn the battery.