User's Manual

36
SYMPTOM POSSIBLE CAUSE & REMEDY
Does not display a shot
Cannot connect Wi-Fi to sensor
Ensure that the Wi-Fi connection between your
smartphone or tablet and the sensor is set up
and connected.
Check that the sensor is switched on and posi-
tioned correctly behind the tee from which the
shot is played.
Check if the correct mode i.e indoor, outdoor,
long indoor is selected.
Make sure that the sensor is switched on, and
check that the communications indicator is
ashing. This means the Wi-Fi is ready but not
connected. Use the smartphone or computer’s
Wi-Fi tools to connect to the FlightScope®. If
the indicator is continuously on, the Wi-Fi is
connected.