User's Manual

FlightScope Strike can be powered from a rechargeable external 12 V DC battery, or from a mains-
powered AC adapter (both included).
Connect the supplied AC adapter (21) to
the Strike unit (20).
Connect the AC adapter to a wall socket
using the supplied mains power cord (22).
Switch the Strike unit on with the Power
switch (23).
NOTE: Make sure the battery has
sufficient charge before using, so that
operation can be uninterrupted.
Connect the battery (24) to the Strike unit
(20) using the supplied battery cable
(25).
Place the battery in the compartment (26)
behind the Strike unit.
Switch the Strike unit on with the Power
switch (23).
The supplied battery is a 20,000 mAH capacity rechargeable Li-Ion technology battery pack. The
original manufacturer’s specifications and instructions apply. The original battery charger/adapter is
included.