User Manual
Table Of Contents
Servo introduction
A
ų
ų
'
'
EN
No.
Install on battery
L
450mm
2
450mm
3
250mm
4
250mm
5
200mm
6
200mm
/
I
ESC
O
Servo connection
1.
Use a Y-harness to connect the two servos, and insert the last
end of the harness into the aileron channel of the receiver.
2.
Use a Y-harness to connect the two servos, and insert the last
end of the harness to the flap channel of the receiver.
3.
Use a Y-harness to connect the left/right main landing gear,
retract servos and insert the last end of the harness into
landing gear channel of the receiver.
-
Pliqh
Insert a battery and lock it
down using the velcro strap.*
*somethings aren't changeable within the
program, so the original remains.