Owners manual

6
Using the clip accessory
To attach your clip you need to open the base of the device.
The easiest way to open it is to use the adhesive and stick your Flic
on a surface. Once in place simply twist anticlockwise and your Flic
should pop open.
To attach the clip make sure the battery is seated correctly and
then align the three tabs on the clip with the respective slots on the
Flic. Firmly push in place and twist clockwise until you hear a click.
The click noise signifies that the clip is correctly attached.
When using Flic with the clip accessory we recommended that you refrain from using it
on thin materials or surfaces as it can slide o leading to product loss.