Owners manual
7
The Flic uses a CR2016 coin cell battery. To change the battery
you need to open the base. Check the “Using the clip accessory”
(page 6) to learn how to open your Flic.
Remove the old battery and replace with a new CR2016 with
the positive (+) side facing up. Slot the battery in the direction
of the V contact first and then apply
downward pressure until the battery
locks in position.*
If the new battery does not have
sucient charge then you may notice
the Flic LED stays on continuously or
starts blinking. Select a new battery and
try again. If you still have an issue with
the LED staying on, please contact our
customer support.
Changing the battery
* To check if the battery is fitted correctly, the battery should lay flat and not pop up.
The base or clip accessory can now easily be attached.