Install Instructions 3-panel tub kits Elite Series Tub Model: TSK60326031 For missing items or returns do not return to store. Please call 877-941-3662 (Monday through Friday 8:00 AM – 5:00 PM MST) FlexStoneProducts.
3-wall Tub Surround Instructions Tub Model: TSK60326031 Item A B C D E F G I J Description Back wall panel Side wall panel Left wall front mitered trim Left wall top mitered trim Right wall front mitered trim Right wall top mitered trim Back wall top trim Corner shelf with bracket Inside corner reinforcement Qty 1 2 1 1 1 1 1 1 2 Please inspect packages for damage or missing pieces, and read instructions carefully prior to installation.
Required Tools x8 x2 Helpful Tools FlexStone offers an installation kit that includes eight cartridges of Performance Pro Adhesive and two cartridges of Performance Pro Color-Tinted 100% Silicone. Select retailers include this in FlexStone kits, while others offer it for purchase separately. Before Starting Consult your local building codes with questions on installation compliance standards.
Install Instructions 1 INSTALLATION OF INSIDE CORNER REINFORCEMENTS (J). 1.1) Flashing Tape Corner Reinforcements go behind the panels in the back vertical corners for added leak protection. This tape has been cut to length, matching the height of the panels of your kit. 1.2) Apply a generous bead of adhesive onto both walls about 3/4 inch away from the corner. Fold the flashing tape at the center crease with the print side together, then press the tape into the corner using a taping or putty type blade.
INSTALLATION OF WET / PLUMBING WALL PANEL (B). vertical trims C and E will influence the width sizing of side wall panels (see Section 6.) NOTE: You will be able to fine tune your panel to a more accurate fit after the holes are cut and your panel can be firmly pushed into the Inside Wall 2.3) Hold side panel as close to plumbing wall as possible. Scribe and trim the inside edge and bottom edge against the tub for best fit before measuring, marking, and cutting holes for plumbing fixtures.
4 INSTALLATION OF BACK WALL TOP TRIM (G) NOTE: Trim moldings are shaped like an “L”, and the long leg is designed to overlap panels, with the short leg returning back to the sheetrock and hiding the panel edge. Be sure to peel protective masking back from the edges of the panels before adhering the trim moldings. 4.1) Note the height of the shower head. Decide if top trims will be installed above or below shower head/escutcheon, keeping in mind that trims can overlap panels from ½” to 2-1/2”.
5 INSTALLATION OF SIDE WALL TRIMS (C, D, E, F). Note: Vertical trim moldings are designed to be installed just outside the tub, running down to the floor, and contour cut to match the tub front shape. Optionally, trims can be cut short to rest on top of the tub. 5.1) Place horizontal left wall top mitered trim (Item D) in place, push into the corner against back wall trim piece, then level it. Mark a level line on the wall on the top side of the molding near the outer end. Set aside this trim piece. 5.
6 INSTALLATION OF CORNER SHELF (I). NOTE: Corner shelf includes a folding-triangle metal bracket with screw holes which is designed to mount directly to the FlexStone wall panels. Be sure to peel away protective masking from the installation area before securing the bracket. 6.1) Position corner shelf bracket in desired corner at desired height. Use a level to mark level lines in pencil. Adjust alignment to include a slight forward slope for water runoff. 6.
THIS PAGE IS INTENTIONALLY LEFT BLANK. FlexStoneProducts.
PACKAGE CONTENTS KIT TYPE ELITE 3-PANEL KIT CONTENTS BACK WALL PANEL LEFT WALL FRONT MITERED TRIM LEFT SIDE WALL PANEL LEFT WALL TOP MITERED TRIM RIGHT SIDE WALL PANEL RIGHT WALL FRONT MITERED TRIM CORNER SHELF BRACKET RIGHT WALL TOP MITERED TRIM CORNER SHELF CLAMSHELL BACK WALL TOP TRIM 2 INSIDE CORNER REINFORCEMENTS PACKAGED DATE FlexStoneProducts.
