Installation Guide

NOTE: Corner shelf includes a folding-triangle metal bracket with
screw holes which is designed to mount directly to the FlexStone wall
panels. Be sure to peel away protective masking from the installation
area before securing the bracket.
5. Installation of Corner Shelf (I)
A. Position corner shelf bracket in desired corner at desired
height. Use a level to mark level lines in pencil. Adjust the
alignment to include a slight forward slope for water runo.
B. Using drywall screws or other coarse-thread screws,
fasten each side of the bracket through the FlexStone panels
and the sheetrock.
C. Fold bracket and complete triangle by bending the tab
over to secure bracket. Dry t the corner shelf material over
the bracket. If corner is out of square, trim one side of shelf
to achieve a tight t.
D. Peel back protective masking from edges of shelf,
apply adhesive to top and bottom of bracket and place
FlexStone material over bracket like a clamshell. Clamp
until dry (24 hours).
6. Sealing with Silicone
A. If you desire to paint the walls now or in the future, use
paintable latex caulk where trim moldings meet sheetrock.
Use wet nger or caulk tool to shape the latex caulk to a
nice nish.
B. Using denatured alcohol, clean and prime all joints in the
surround, including vertical and horizontal joints where panel
meets tub, panel meets panel, or trim meets panel. Clean
any oils, greases, or adhesive residues from these joints.
C. Seal all joints in your surround with 100% silicone. Our
installation kit has color-matched translucent silicone, tinted
to complement your selected FlexStone color. Apply a ne
bead of silicone to all joints. Use wet nger or caulk tool to
shape the silicone to a nice nish. Follow any directions on
sealant tube.
PLEASE WAIT 24 HOURS BEFORE INSTALLING FINISH
PLUMBING OR USING YOUR NEW TUB/SHOWER SURROUND.
REMOVE REMAINING PROTECTIVE MASKING PRIOR TO USE.
– 6 –
V.1 - 3/18/2019