SDS

PerformanceProAdhesives.com Page 3 of 6
Safety Data Sheet
100% SILICONE SEALANT
PERFORMANCE PRO
Vapor pressure: Negligible (250 C)
Vapor density: > 1 (air=1)
Relative density: 1.04 (25 0 C)
Solubility (water): Not soluble
VOC Content: 30 grams per liter
Partition coefficient: Not applicable
(n-octanol / water)
Auto-ignition temperature: No data
Decomposition temperature: Not available
Viscosity: Not applicable
Molecular weight: Not applicable
Appearance
Form: Paste
Color:
Odor: Acetic acid odor
Odor Threshold: Not available
pH: Not available
Melting point / freezing point: Not available
Initial boiling point and Not available
boiling range:
Flash Point: 141.8 oF (> 96 0 C) Closed cup
Evaporative rate: < 1 (Butyl Acetate = 1)
Flammability (solid, gas): Not applicable
Upper / Lower flammability or explosive limits:
Flammability limit – lower (%): No data
Flammability limit – upper (%): No data
Explosive limit – Lower (%): Not available
Explosive limit – Upper (%): Not available
9. Physical / Chemical Characteristics
Occupational exposure limits
US. OSHA Table Z-1 Limits for Air Contaminants (29 CFR 1910.1000)
Components CAS # Type Value
Titanium oxide 13463-67-7 PEL 15 mg/m3
Decomposition CAS # Type Value
Distillates (petroleum) 64742-46-7 TWA (Mist) 5 mg/m3
hydrotreated middle
Acetic acid 64-19-7 PEL 25 mg/m3
10 ppm
US. ACGIH Threshold Limit Values Components
Components CAS # Type Value
Titanium oxide 13463-67-7 TWA 10 mg/m3
Decomposition CAS # Type Value
Acetic acid 64-19-7 STEL 15 ppm
TWA 10 ppm
US. NIOSH: Pocket Guide to Chemical Hazards
Decomposition CAS # Type Value
Acetic acid 64-19-7 STEL 37 mg/m3
15 ppm
TWA 25 mg/m3
10 ppm
Distillates (petroleum) 64742-46-7 TWA (Mist) 5mg/m3
hydrotreated middle ST (Mist) 10mg/m3
Biological limit values: No biological exposure limits for the ingredient(s).
Appropriate engineering controls: Provide adequate general and local exhaust. Provide eyewash station. Pay attention to ventilation such as local
exhaust, mechanical and or / door open for at least 24 hours after applications.
Individual protection measures such as personal protective equipment.
Eye / Face protection: Tightly sealed safety glasses according to EN 166.
Skin / Hand protection: Wear protective gloves.
Other: Wear suitable protective clothing.
Respiratory protection: If airborne concentrations are above the applicable exposure limits, use NIOSH approved respiratory protection.
Thermal hazards: Wear appropriate thermal protective clothing, when necessary.
General Hygiene Considerations: Avoid contact with eyes. Avoid contact with skin. When using, do not eat, drink or smoke. Keep away from food
or drink. Wash hands before breaks and immediately after handling the product. Contaminated work clothing
should not be allowed out of the work place. Handle in accordance with good industrial hygiene and safety
practice.
8. Exposure Controls / Personal Protection
Trans Beige