SDS

ManualsBrandsFlexStone ManualsAdhesiveBeige Tub & Shower Surround Adhesive and Tinted Silicone Sealant - 10 pk.

PerformanceProAdhesives.com Page 1 of 6

Revision Date: May 1, 2017Product Name: PRO-2000 Bath Surround Adhesive

Safety Data Sheet

ADVANCED HYBRID ADHESIVE

PERFORMANCE PRO

Chemical Characteristics: Silane-terminated polyether + filler + auxilary

Information on Ingredients:

TYPE CAS NO. SUBSTANCE CONTENT (wt. %) NOTE

Lower Upper

INHA 2768-02-07 Trimethoxy vinylsilane <2.0

INHA 13822-56-5 3-(trimethoxysilyl) <2.0

proppylamine

VERA 14808-60-07 Quart <0.3 C1, C2

INHA 3648-18-8 Dioctyltin dilaurate >0.1 <0.2 R

Type: HYD - by-product upon hydrolysis, INHA - ingredient, NEBE - by-product, MONO - residual monomer, VERO - impurity, VUL - by-product upon vulcanization. ***NOTE: C1 - IARC carcinogen, C2 -

NTP carcinogen, C3 - OSHA carcinogen, NH - non-hazardous, R - reproductive toxin.

Substances listed in the Subsections “HAPS” and “California Proposition 65 Carcinogens / Reproductive Toxins” that are not listed in this section are only present at quantities below 0.1% for California

Proposition 65 listed toxins or below 1% for non-carcinogens HAPS or they are inextricable bound in the product.

3. Composition / Ingredients

Classification of the Substance or Mixture

Classification (GHS):

Class Category Route of Exposure

Reproductive toxicity Category 2 (developmental toxicity)

GHS Label Elements

Signal Word: Warning

H-Code Hazard Statements

H361d Suspected of damaging the unborn child

P-Code Precautionary Statements

P280 Wear protective gloves / protective clothing / eye protection

Reportable ingredients for labeling:

Bis-trimethoxysilylpropylcarbamato-polypropylenglycol

Polypropyleneglycol

Calcium carbonate

Hydrophobic silica

Dioctyltin dilaurate

Other Hazards: Products hydrolyses under formation of methanol (CAS no. 67-56-1). Methanol is toxic by inhalation, in contact with skin and if

swallowed. Methanol causes damage to organs. Methanol is highly flammable.

2. Hazards Identification

Identification of the Substance or Preparation

Commercial Product Name: PRO-2000 BATH SURROUND ADHESIVE

Manufacturer: Distributor:

Silco Inc. Design Imaging, LLC

7635 St. Clair Avenue 1170 Industrial Park Rd.

Mentor, OH 44060 Orem, UT 84057

Phone: 440.975.8886 Phone: 844.328.3331

General Description: Sealant / Adhesive

Physical Form: Paste

Color: White

Odor: Slight Odor

NFPA Profile: Health 1 Flammability 1 Instability/Reactivity 0

Note: NFPA = National Fire Protection Association

1. Product & Company Information

Summary of content (12 pages)

PAGE 1
PERFORMANCE PRO ADVANCED HYBRID ADHESIVE Safety Data Sheet Product Name: PRO-2000 Bath Surround Adhesive Revision Date: May 1, 2017 1. Product & Company Information Identification of the Substance or Preparation Commercial Product Name: PRO-2000 BATH SURROUND ADHESIVE Manufacturer: Distributor: Silco Inc. Design Imaging, LLC 7635 St. Clair Avenue 1170 Industrial Park Rd. Mentor, OH 44060 Orem, UT 84057 Phone: 440.975.8886 Phone: 844.328.
PAGE 2
PERFORMANCE PRO ADVANCED HYBRID ADHESIVE Safety Data Sheet 4. First Aid Measures General Information: Get medical attention immediately if irritation or symptoms occur. Before seeking medical treatment remove contaminated clothing and shoes. Take copy of the Safety Data Sheet when going for medical treatment. After Inhalation: If inhaled remove to fresh air. If not breathing give artificial respiration. If breathing is difficult give oxygen.
PAGE 3
PERFORMANCE PRO ADVANCED HYBRID ADHESIVE Safety Data Sheet 8. Exposure Controls / Personal Protection Engineering Controls Ventilation: Use with adequate ventilation. Recommended. Local Exhaust: In case of potential decomposition products: Local exhaust ventilation which meets the requirements of ANSI Z9.2 is recommended to control airborne containments at the point of use. (to maintain concentration below TLV).
PAGE 4
PERFORMANCE PRO ADVANCED HYBRID ADHESIVE Safety Data Sheet 11. Toxicological Information General Information: Data derived for the product as a whole are of higher priority than data for single ingredients.
PAGE 5
PERFORMANCE PRO ADVANCED HYBRID ADHESIVE Safety Data Sheet 12. Ecological Information Toxicity Assessment: Assessment based on ecotoxicological tests with similar products under consideration of the physical-chemical properties: For this product no effects on aquatic organisms, relevant or classification, are expected. According to current knowledge adverse effects on water purification plants are not expected. Persistence And Degradability Assessment: Silicone content: Biologically not degradable.
PAGE 6
PERFORMANCE PRO ADVANCED HYBRID ADHESIVE Safety Data Sheet 15. Regulatory Information (cont.) WHMIS Hazard Classes: None. DSL Status: This material or one or more of its components is not listed on the Canadian Domestic Substances List. Canadian Ingredient Disclosure List: 14808-60-07 Quartz Details of International Registration Status South Korea (Republic of Korea) ECL (Existing Chemicals list): This product is listed in, or complies with, the substance inventory.
PAGE 7
PERFORMANCE PRO 100% SILICONE SEALANT Safety Data Sheet Product Name: PRO-3000 Color-Tinted Silicone Revision Date: May 1, 2017 1. Product & Company Information Commercial Product Name: PRO 3000 COLOR-TINTED SILICONE Product Classification: Silicone Sealant Manufacturer: Distributor: Silco Inc. Design Imaging, LLC 7635 St. Clair Avenue 1170 Industrial Park Rd. Mentor, OH 44060 Orem, UT 84057 Phone: 440.975.8886 Phone: 844.328.
PAGE 8
PERFORMANCE PRO 100% SILICONE SEALANT Safety Data Sheet 4. First Aid Measures Inhalation: Remove to fresh air. Call a physician if symptoms develop or persist. Skin Contact: Wash off with soap and plenty of water. For minor skin contact, avoid spreading material on unaffected skin. If skin irritation or rash occurs: get medical attention / advice. Take off contaminated clothing and wash before use. Eyes Contact: Immediately flush with plenty of water for at least 15 minutes.
PAGE 9
PERFORMANCE PRO 100% SILICONE SEALANT Safety Data Sheet 8. Exposure Controls / Personal Protection Occupational exposure limits US. OSHA Table Z-1 Limits for Air Contaminants (29 CFR 1910.
PAGE 10
PERFORMANCE PRO 100% SILICONE SEALANT Safety Data Sheet 10. Stability & Reactivity Reactivity: No hazardous reaction known under normal conditions of use, storage and transport. Chemical stability: Stable at normal conditions. Possibility of hazardous Reactions: Hazardous polymerization does not occur. Conditions to avoid: None known. Incompatible materials: Strong oxidizing agents. Water and moisture.
PAGE 11
PERFORMANCE PRO 100% SILICONE SEALANT Safety Data Sheet 11. Toxicological Information (cont.) Reproductive Toxicity: Octamethylcyclotetrasiloxane administered to rats by whole body inhalation at concentrations of 500 and 700 ppm for 70 days prior to mating, through mating, gestation and lactation resulted in decreases in live litter size. Additionally, increases in the incidence of deliveries of offspring extending over an unusually long time period (dystocia) were observed at these concentrations.
PAGE 12
PERFORMANCE PRO 100% SILICONE SEALANT Safety Data Sheet 15. Regulatory Information US federal regulations: This product is a “Hazardous Chemical” as defined by the OSHA Hazard Communication Standard, 29 CFR 1910.1200. OSHA Specifically Regulated Substances (29 CFR 1910.