Installation Guide

Remodel Trim Instructions
FLXRTK3296
Remodel Trim
– 1 –
Installation of Remodel Trim
1. Remodel Trim allows FlexStone to be used over existing tile.
Tile should be in good shape, clean and dry, and wall surfaces
should be at (i.e. remove any accessories that would interfere
with the FlexStone panels). The Remodel Trim will need to be
cut to proper length and mitered according to the FlexStone
Bath Kit being installed.
2. The return lip of the trim (the one without the nished
edge) is oversized to t almost any bathroom tile thickness, and
should be cut to size depending on your tile thickness. Size the
lip to cover the existing tile, plus the FlexStone wall panel, plus
approx. 1/4” of space for adhesive (adhesive between tile and
FlexStone wall panel, and adhesive between panel and trim
molding). Use a table saw, if available, to easily rip the trim lip
to size, or a straight edge and utility knife.
3. Follow instructions for installation of your particular
FlexStone Bath kit, using the Remodel Trims in place of
standard trims.
Cut lip to size depending
on tile thickness
V.2 06/2021