Instructions / Assembly
Install Instructions
5.
6.
7.
base from shifting position.
We strongly recommend using a licensed plumber to
connect the drain assembly to the drain pipe. If your
selected drain is a glue-in style, apply the appropriate glue
to the drain pipe and the inside surface of the lower drain
body. Be sure to use the correct glue based on your drain
pipe and drain assembly type (i.e. ABS or PVC). After the
threshold in all directions to ensure the base is completely
all stud locations. After drilling the pilot holes, apply a small
amount of silicone to the pilot holes and use 1 ½” stainless
steel screws to secure the shower base to the studs. Be careful
DRAIN ASSEMBLY
Pilot Holes
Strainer
Rubber Gasket
Silicone Sealant
Upper Drain Body
Friction Gasket
Shower Base
Lower Drain Body
– 5–
V.4- 04/2020