Instructions / Assembly

FlexRight
®
Installation Instructions
STEP 1
Attach flexible duct to air device per
flexible duct manufacturer's installation
instructions.
STEP 2
Thread cable ties through both FlexRight
saddle bands. Fits all flexible duct sizes 4
inches through 16 inches. (See Figure 1)
STEP 3
Position FlexRight under flexible duct.
Cable ties wrap around neck of air device
and duct to form 90° elbow. (See Figure 2)
STEP 4
Fasten cable tie tight around neck of air
device to secure FlexRight. For best results,
keep duct insulation out from under cable
tie as tightened.
STEP 5
Fasten second cable tie around flexible
duct. Do not over-tighten, as to crush
flexible duct.
STEP 6
Cut-off and discard excess from both cable
tie ends.
Figure 1
Figure 2
Figure 3, Alternate Installation