User guide

5113235 55
11 Mount the four brackets. To get the correct verti-
cal space between pallet and bracket use a piece
of slide rail (thickness approx. 2 mm) as a tempo
-
rary distance piece at each bracket.
Press each bracket down towards the pallet
before tightening the screws.
Use the 10 mm box
wrench
.
The arrow shows the upper holes for fitting on XT
Compact conveyor.
12 When all brackets are mounted use the 6 mm
Allen key to gently press the two pistons down.
13 Remove the pallet.
14 Dismount the temporary distance pieces (slide
rails) from the brackets.