User guide

Functions

Created by EBCCW 00:06

5114899

3.3 Function description for Divert and Merge

modules 45°

The combiner function gives the opportunity to split and join highway to sat-

ellite/ satellite to highway flows in a fully controlled way. The function is

equipped with all needed parts to setup and run it, including set of sensors

(not mandatory), RFID read/write head (not mandatory), fasteners and

pneumatic actuators.

Excluded parts:

•Chain

• Slide rails for chain and guide rails

• Tubes for pneumatic circuit

• Pallets

• Cables (for sensors), RFID r/w head

• Valves for pneumatics

3.3.1 Combined Diverter/Mergers

A Combined diverter/merger is used to create a sub line for example to

guide pucks out and in on a satellite conveyor from the main conveyor.

This function has the behaviour from both the diverter and the merger. The

prioritized order can be predetermined or decided dynamically from a line

controller.

There are two variants of the 45° Combined Diverter/Merger.

• Combined Diverter/Merger, 45°, Left

• Combined Diverter/Merger, 45°, Right

45°