Merge module XBUT 45 MR, 90 MR, 45 ML and 90 ML 5970578-03 5970579-02 5970584-02 5970585-02 User documentation ver 1.
Merge module XBUT 45 MR, 90 MR, 45 ML and 90 ML X85 Pallet
Merge module XBUT 45 MR, 90 MR, 45 ML and 90 ML Function description The Merge module gives the opportunity to merge two flows of pallets (satellite to highway) in a fully controlled way. Stop positions The two flows are equipped with stops in order to avoid collision.
Merge module XBUT 45 MR, 90 MR, 45 ML and 90 ML Initiators and actuators B1 A1 B3 A2 B2 Initiators Actuators B1 Pre-stop highway B2 Pre-stop satellite B3 Sensing pallet route A1 Pre-stop. Single acting. A2 Pre-stop. Single acting.
Merge module XBUT 45 MR, 90 MR, 45 ML and 90 ML Interfaces Initiators B1: M12-connector, 3-pin B2: M12-connector, 3-pin B3: M12-connector, 3-pin Actuators Pneumatic cylinders A1: 6 mm A2: 6 mm X85 Pallet
Merge module XBUT 45 MR, 90 MR, 45 ML and 90 ML Spare parts Standard Des.
Merge module XBUT 45 MR, 90 MR, 45 ML and 90 ML Cylinder details Cylinder A1 and A2 ”Pre-stop” Type: Single acting with two ports. Function: Pressurized: Releases the pallet flow No pressure: Blocks the pallet flow For safety reasons, the pallet stop is blocking the flow in case of a pressure drop, preventing pallets from travelling uncontrolled along the conveyor. The stop should not re-block the flow while a pallet puck is in a position where it could be clamped.
Merge module XBUT 45 MR, 90 MR, 45 ML and 90 ML Sensor details Sensor B1 and B2 ”Pre-stop” Type: Proximity switch, inductive Position: Placed together with Pre-stop. Function: Detects the initiator plate of the pallet before the pallet is stopped and stays active until the pallet leaves the stop. The reason why the pallet is detected by the sensor before the pallet hits the stop, is to enhance the efficiency of the pallet flow.
Merge module XBUT 45 MR, 90 MR, 45 ML and 90 ML Pneumatic drawing XBUT 45 MR, 90 MR, 45 ML and 90 ML Pallet pre-stop Pallet pre-stop PUN-6x1 PUN-6x1 14 4 2 5 1 3 12 14 4 2 5 1 3 12
