Divert module XBUT 45 DR, 90 DR, 45 DL and 90 DL 5970580-02 5970581-02 5970586-02 5970587-02 User documentation ver 1.
Divert module XBUT 45 DR, 90 DR, 45 DL and 90 DL X85 Pallet
Divert module XBUT 45 DR, 90 DR, 45 DL and 90 DL Function description The Divert module gives the opportunity to split one flow of pallets in a fully controlled way. Stop positions The function is equipped with a stop in order to avoid collisions.
Divert module XBUT 45 DR, 90 DR, 45 DL and 90 DL Initiators and actuators B3 A2 B4 B5 B2 Initiators Actuators B1 Pre-stop highway B2 Sensing pallet route B3 RFID reader B4 Straight flow B5 Short-cut flow A1 Pre-stop. Single acting. A2 Arm. Double acting.
Divert module XBUT 45 DR, 90 DR, 45 DL and 90 DL Interfaces Initiators B1: M12-connector, 3-pin B2: M12-connector, 3-pin B3: M12-connector, 4-pin (Asi) B4: M12-connector, 3-pin B5: M12-connector, 3-pin Actuators Pneumatic cylinders A1: 6 mm A2: 6 mm X85 Pallet
Divert module XBUT 45 DR, 90 DR, 45 DL and 90 DL Spare parts Standard Des.
Divert module XBUT 45 DR, 90 DR, 45 DL and 90 DL Cylinder details Cylinder A1 ”Pre-stop” Type: Single acting with two ports. Function: Pressurized: Releases the pallet flow No pressure: Blocks the pallet flow For safety reasons, the pallet stop is blocking the flow in case of a pressure drop, preventing pallets from travelling uncontrolled along the conveyor. The stop should not re-block the flow while a pallet puck is in a position where it could be clamped.
Divert module XBUT 45 DR, 90 DR, 45 DL and 90 DL Sensor details Sensor B1 ”Pre-stop” Type: Proximity switch, inductive Position: Placed together with Pre-stop. Function: Detects the initiator plate of the pallet before the pallet is stopped and stays active until the pallet leaves the stop. The reason why the pallet is detected by the sensor before the pallet hits the stop, is to enhance the efficiency of the pallet flow.
Divert module XBUT 45 DR, 90 DR, 45 DL and 90 DL Pneumatic drawing XBUT 45 DR, 90 DR, 45 DL and 90 DL Pallet pre-stop Arm PUN-6x1 14 4 2 5 1 3 12 PUN-6x1 14 4 2 5 1 3 12
