Manual

Unload the X65 locating module
Created by EBCCW 00:06
15
8050183
4.2 Unloading instructions
Before starting unloading, all fastening means (securing belts, screws, etc.)
that secure the module into the means of transport must be removed. Sub-
sequently check whether the transport supports are still connected well to
the module. After this the unloading procedure may be started.
4.2.1 Introduction
4.2.1.1 Accessories and spare parts
Spare parts for the X65 modules can also be ordered. See Recommended
spare parts on page 19
4.2.1.2 Ordering process
Every X65 module has its own unique order code which can be found in
each module description. The various options available for each module
are shown in the order code and all the parameters have to be specified
when ordering.
It is important to know that by ordering for example a conveyor module, you
do not automatically get a support module. This has to be ordered sepa-
rately.
4.2.1.3 Shipment
Modules are delivered in std eur pallet 1200x800.