Manual

Technical maintenance
34
5113196-2
6 Technical maintenance
6.1 Maintenance intervals
Within the application, where X45 equipment is normally used, environ-
mental conditions are clean compared to many other FlexLink system in-
stallation sites. During these conditions X45 modules normally require a
minimum of maintenance.
The following maintenance interval is recommended for X45 equipment:
• An inspection for all equipment is recommended regularly every
1500 operating hours or every 3rd month depending on which
case that occurs first.
In case of less clean environmental conditions certain wear can occur and
more frequently planned maintenance intervals are recommended. If this
is the case, consult your FlexLink supplier.
Table 1: Interval
Interval
1-shift Every 3:rd month
2-shift Every 3:rd month
3-shift Every 1500 hours