Manual

Unload the X45 system
Created by EBCCW 00:06
21
5113196-2
4.2 Unloading instructions
Before starting unloading, all fastening means (securing belts, screws, etc.)
that secure the module unto the means of transport must be removed. Sub-
sequently check whether the transport supports are still connected well to
the module. After this the unloading procedure may be started.
4.2.1 Shipment
Modules are normally delivered in flat boxes with a maximum length of ap-
proximately 3 m. See photo below. Conveyor modules will be delivered in
sections of maximum 3 m which are easy to reassemble.
. .