Instruction Manual

Fasteners
Created by EBCCW 00:06
11
5683EN-1
4.4 T-bolts
Figure 3 XLAT
T-bolts can be entered from the beam side, and when turned 90° they
will
stay in place after tightening with nuts (XLAN 8) and washers (BRB
8,4×16). The indication groove in the T-bolt should be at 90° to the convey-
or T-slot.
T-bolts are used when attaching support brackets, guide rails and drip trays
to
the conveyor beam. Do not use T-bolts with support beams!