Instruction Manual

Fasteners
Created by EBCCW 00:06
9
5683EN-1
4 Fasteners
4.1 Standard screws, nuts, washers
M6S, MC6S, MF6S, M6M, BRB 8,4×16, XLAL
4.2 Slot nuts and square nuts
XCAN, XLAQ
Square nuts can be used in support beams and small beams instead of
XCAN nut
s, but they can also be used in conveyor beams as opposed to
XCAN nuts. They do not stay in place in vertical positions and have to be
inserted from the beam end.
When using XLAQ square nuts, remember to put in a sufficient number be-
fore completing the assembly.