User Manual
Put out of commission
Created by EBCCW 00:06
Page 63 of 68
5478EN-3
7.3 Transport
While transporting the Spiral Elevator a number of safety measures are to
be taken.
Use the same tools and equipment as indicated in section 4 for the Unload
of the Spiral Elevator.
A suitable Method Statement and Risk Assessment for the dismantling and
transportation should be done by the relevant responsible person. This
Method Statement should be followed throughout the decommissioning
process.
. Note! A transport frame / base should be used which is similar to
the unit used for the initial delivery of the Spiral
. Note! Transport of the Spiral Elevator in the vertical or horizontal
mode depends upon the access route, vehicle height and general
height of the Spiral Elevator.
As a guide, all Spiral Elevators with a total height above 2.4
metres should be transported in the horizontal mode.