User Manual

Technical specifications
Page 8 of 68
5478EN-3
2 Technical specifications
Below is the technical specification of the Spiral Elevator.
Further product details to which the Spiral Elevator has been designed are
contained within the overall Project Documentation (when purchased as
part of a Project System).
Use of the Spiral Elevator outside of the scope detailed within the technical
specification, quotation or documentation will invalidate the warranty.
General FlexLink Spiral Elevator specification
500 mm inclination per winding (9 degree)
3-8 windings
1000 mm nominal centreline diameter
Speed 5 - 60 metres per minute
Lower height:- 600, 700, 800, 900 or 1000 mm
- Adjustable -50/+70 mm
Max load 10 Kg/m (specific Spiral Elevators may be with a lower
limit due to actual gear motor used)
Product size:
- width= 50 - 200 mm
- length= 80 - 250 mm
- height= 1,5 x Length (max 300 mm)
- see Project Documentation if applicable
Drive and idler ends are horizontal
Chain width 100 mm
Friction top chain
Steel chain with bearings running on the inner guide rail
Wet coated mild steel frame
Column diameter 160 mm
M8 thread for guide rail