User Manual

Safety
Created by EBCCW 00:06
13
5112204
1.4 Safety measures to be taken
For a safe operation of the Elevator a number of safety measures are to be
taken. These include the following measures:
• Clean floor surface - With a clean floor surface the operator will
not be hindered while operating the Elevator. This can prevent
tripping or slipping, so that the operator does not unexpectedly
come into contact with the Elevator.
1.5 Explanation of symbols
Just like in the manual, symbols are used that have been placed on the El-
evator in order to point the attention of the user to certain situations or pro-
vide certain information on components of the Elevator.
No. Description Picture
1.Type plate Elevator This contains the name and the address of
the Manufacture. Apart from that the
declaration of incorporation, series or type
indication, serial number and the year of
construction of the Elevator.
2.Type plate motor This contains the name and the address of
the motor supplier. Apart from that the CE-
mark, kind of motor oil, series or type
indication, serial number and the year of
construction of the motor.
3. Risk for electric shock Placed on control box.
4. Protective earth According to IEC 60417. Placed below
control box. Points out where to connect
equipotential bonding conductors.