User Manual

Safety

5112204

1.2 Important safety conditions

At the moment that the elevator is going to be operated by a user, the fol-

lowing safety conditions must be met:

• Make sure that children or animals have no access to the machine

and its surrounding area by, for example, screening off the eleva-

tor with a fence.

• Only persons who have read and understood the operating in-

structions are allowed to operate, maintain and clean the ma-

chine.

• Do not reach into the machine while it is running or on. Even if the

machine is not running, it can be ‘on’, which means start operating

automatically.

• Safety provisions, such as side plating, bottom plating, emergen-

cy stops and detectors may not be removed or deactivated while

the elevator is running.

• Provide good ambient lighting to enable the operator to work well

and orderly with the elevator.

1.2.1 General

. • Incorrect use of the equipment can cause personal injury.

• Do not stand or climb on the equipment.

• Do not wear clothing or other articles that can fasten in the ma-

chine.

• Follow the instructions in this user manual when transporting the

machine. FlexLink Components AB must approve all modifica-

tions or changes to this machine.

• Only use recommended spare parts.

• Only authorised personnel may open electrical units.

• FlexLink is not responsible for damage if service on the equip-

ment is not performed in accordance with this user manual.