FLESHPOT Item No. E7TLB/E7LS/E7TLW Installation Guide Website: www.flexispot.
CYT ET Install supporting beam (4) Install auxiliary beam (5) Max. Weight Capacity 330 Ibs (150 kg) Max. Speed 1.5"s D xe Input Voltage 100-240V ae Adjustable Height (580-1230 mm) (1100 1900 mm) Fre Wide Expand (1260 1860 mm) I Duty Cycle 10% (Working 2 minutes then stop 18 minutes) Seas Working Temperature = Accessory Package Figures shown are for reference only. Please contact customer service if there are any accessories or tools missing.
Install Auxiliary beam (5) and Supporting plate (6) Install the Tabletop, Hand Switch(7) and Control Box (8) Buckle in the auxiliary beam (5) to the supporting beam (4), and the specific position can be selected according fo the tabletop.
LX Install the Cable Management Tray (3) Buckle in the other side Firstly, screw the screw (B} into the supporting beam (4) with Allen Key (F), and not tighten completely. Buckle one side of the cable management tray (3) into the screw (B), then press the other side into the screw (B). Finally, the screw (B) is locked with Allen Key (F). The cable management tray (3) on the auxiliary beam (5) are installed in the same way.
LLC EEL ES This list is used for checking and solving common faults and errors. Please contact the manufacturer if problem you encounter is not on the list below. Problem Solution No response when pressing and holding the DOWN button 1. Check the cable connection. 2. Contact the distributor or the manufacturer. No response when pressing the UP button and DOWN button 1. Check the cable connection. 2. Contact the distributor or the manufacturer. Speed of lifting is slow 1.
Fleshpot Limited Warranty 08 This limited warranty offered flexibility covers defects in material or workmanship in new Fleshpot products. This warranty extends to the original purchaser only and is non-transferable. Only consumers purchasing Fleshpot products from authorized Fleshpot retailers or resellers may benefit from our limited warranty.
