User Manual

Safe Operating Procedure
PPE Required
Stump Grinder
•Complete pre-start checklist
•Read Manufacturers Operation Manual (www.flexihire.com.au)
•Report any faults or damage to Flexihire 1300FLEXIHIRE
•Do not wear loose clothing or jewellery
•Do not operate equipment near pedestrians or people
•Do not operate without the appropriate PPE as detailed
•Do not operate equipment under the influence of drugs or alcohol
•Assess the immediate work area for any hazards
•Control or eliminate all the risks associated with the hazards
•Hazards to check for that may require risk control-
❑
Overhead power lines
❑
Digging (underground services)
❑
Steel Wire & Pipes
❑
Traffic & moving machinery
❑
Stored energy – air, hydraulic, electricity, pressure
Risk Assessment
General Safety Instructions
•Refuelling – Do not smoke, or introduce ignition source, always turn
engine off and allow engine to cool first, relieve fuel pressure by
loosening cap slowly, wipe clean any fuel spills prior to re-start, If fuel
spilled on clothes change clothes, ensure cap is replaced & store fuel
vessel away from work area
•Do not breathe fuel vapour & replace cap securely after fuelling
•Do not operate engine without adequate ventilation
•Beware of hot surfaces on engine & other parts
General Engine Safety
❑
Loose rocks
❑
Falling objects
❑
High Voltage
❑
Foreign objects
Read and understand the SOP (Safe Operating Procedure) and Operation
Manual for the stump grinder.
Perform a site walk around prior to operation looking for any foreign objects
like metal, wire, rocks, bricks or other items other than the stump
With the machine turned off, conduct a visual inspection on stump grinder
head before each grind to ensure there are no cracks.
Check there are no underground services like gas pipes, water, electricity
Never allow children to operate machine or stand anywhere near machine
whilst in operation. Minimum 8m distance from machine
When operating keep the lift arms as low as possible. Do not travel or turn
with lift arms up.
Plan work area prior to operation & ensure there is a minimum 8m exclusion
zone where no person can enter
Turn on level ground. Go up and down slopes, not across them. Keep the
heavy end of the machine uphill.
Ensure the operator is wearing PPE including a face shield as objects can be
ejected at high velocity
Ensure all guards and covers are in place before use.
Ensure all machines controls and levers are in the NEUTRAL position before
starting the machine
When grinding wheel is in motion, do not drive machine. Grinding wheel
must be fully stopped before moving machine.
Operating Safety Instructions
•Always contact local authorities prior to performing any digging to identify underground services
Digging Safety
•I/We, have been issued with and read through the Standard Operating Procedure – Stump Grinder
•I/We also understand that it is essential, that before any works commence with the stump grinder that:
• There is an exclusion zone of a minimum of 8m that no person can enter during the operation of the stump grinder; and
• An assessment of the ground for objects, such as metal wire and underground services like gas pipes and electricity should be conducted
before operation; and
• The operator of the stump grinder is wearing all recommended PPE during operation.
Name _________________________________________ Signature _____________________________ Date _________
Name _________________________________________ Signature _____________________________ Date _________
Sign Off
FMS10-5.1.3.9.6.9 SOP Stump Grinder
Version #: FLX 3.1
Issue: October 2021
Review: October 2026