Use and Care Guide

07.30.2017 | Page 3
Flexco Floors | 1401 E. 6th St. - Tuscumbia, AL 35674
P: 800.633.3151 | flexcofloors.com | Made in the USA
CARE & MAINTENANCE
ESD Vinyl
STATIC CONTROL TILE
flooring damage. All rolling chairs or seating must have a resilient
flooring chair pad installed over the finished floor to protect floor
covering. All fixed furniture legs must have permanent felt or soft
rubber floor protectors installed on all contact points to reduce
indentation. Floor protectors must have a flat contact point of
at least 1 sq. in or 1 in. in diameter and must cover the entire
bottom surface of the furniture leg.
Ensure all furniture castors and chair legs and are clean and free
of any and all dirt and debris. Routinely clean chair castors and
furniture legs to ensure that dirt or debris has not built up or
become embedded in castors or floor protectors. Replace chair
castors and floor protectors at regular intervals, especially if they
become damaged or heavily soiled.
Place walk-off mats at outside entrances. Ensure mats are
manufactured with non-staining backs to prevent discoloration.
For more information regarding cleaner
application, floor finish application or finish
removal, please consult the associated Excelsior
product data sheet.