User guide

FLEXLOCK FLE-HG RADIUS ROOF EDGE
FULLY ADHERED OR MECHANICALLY ATTACHED SINGLE-PLY VERSION
IMPORTANT!!!
MUST INDICATE PROPER RADIUS CONDITION BY
CIRCLING APPROPRIATE OUTSIDE FACE
PROVIDING A RADIUS
THE RADIUS MAY BE PROVIDED
IN ONE OF TWO METHODS:
1. THE ACTUAL KNOWN RADIUS IS
OUTSIDE
FACE
ROOF LINE
OR
2. FIELD CONDITION MEASUREMENTS
NOTE: REFER TO ATTACHED WORKSHEET
RADIUS
(PROVIDED BY APPROVER
PER DETAIL A)
TOP ^
VIEW
INDICATES AREAS THAT WILL BE SLIT AS
NEEDED TO ACCOMODATE RADIUS
MIDPOINT OF
STRAIGHT EDGE
- ---------------- 36"
(914 mm)
LENGTH OF
STRAIGHT EDGE
NOTE: CHECK MEASUREMENTS ALONG ENTIRE RADIUS.
DETAIL A
RADIUS FASCIA PROVIDED
IN 12'-0"(3.65 m) LENGTHS
RADIUS EXTRUDED BAR PROVIDED
IN 12'-0"(3.65 m) LENGTHS
FLEXLOCK FLE-HG RADIUS ROOF EDGE DIMENSIONS
PRODUCT ID. NO.
H DIM.
XDIM.
COVERAGE
[3 HG-AF-40
□ HG-AF-55
□ HG-AF-70
4" (102 mm)
5 1/2" (140 mm)
7" (178 mm)
2 3/4" (60 mm)
41/4" (108 mm)
5 3/4" (145 mm)
1 NAILER
2 NAILERS
3 NAILERS
Fabrication will proceed only after receipt of
signed print approval.
Print Approval:
Architect and/or contractor shall verify all
dimensions, sizes and quantities. All
products to be installed in strict accordance
with Flex's printed instructions.
Approved by:
Date:
____
MATERIAL:
. .050" (1.27 mm) Aluminum
, .063" (1.60 mm) Aluminum
OTHER
_________________
Color:,
Finish:
QUANTITIES:
Lineal Feet 12'-0" (3.65 m) Lengths
PROJECT:
ARCHITECT:
ROOFING CONTRACTOR:
REPRESENTATIVE/DISTRIBUTOR:
Customer Service:
Phone: 800^558~”2162
Fax: 800-373-^9156
DATE: 12/13/10
DRN BY: JJC
CKD BY: SAK
SHT.# OF
DWG# 28010-11785
B
p: 800-969-0108
f: 610-916-9501
print approval
25