User Manual

APPROVH
FLEXCAP FLC COPING
EXISTING SLOPE WITH NAILER VERSION
ANSI/SPRI ES-1 TESTED
L
Coping is to be installed per Specifications and Flex's Installation Instruction Dwg. # 28111-3460
- Concealed splice plates are provided with factory applied dual
non- curing sealant strips.
- Unless otherwise noted, fabrication of miters and accessories
are furnished standard utilizing a non-penetrating quicklock joint,
then factory sealed watertight.
Fabrication will proceed only after receipt of
signed print approval.
Print Approval:
Architect and/or contractor shall verify all
dimensions, sizes and quantities. All
products to be installed in strict accordance
with Flex's printed instructions.
Approved by:
Date: _____
■ Welded Miters and Accessories
Check one □ Required (surcharge) □ Not applicable
MATERIAL:
__ 24 Ga. (0.65 mm) Galv.
_ .040" (1.01 mm) Alum. Color:.
_ .050" (1.27 mm) Alum.
__ .063" (1.60 mm) Alum. Finish:
OTHER________________
QUANTITIES:
___ Lineal Feet 12'-0" (3.65 m) Lengths
Outside Miters @ ( _______ °)
Inside Miters @ ( ______ °)
Right End Caps
Left End Caps
PROJECT:
ARCHITECT:
ROOFING CONTRACTOR:
REPRESENTATIVE/DISTRIBUTOR:
Customer Service:
Phone: [phone]
Fax:[phone]
DATE: 12/13/10
DRN BY: JJC
CKD BY: SAK
SHT.# OF
DWG# 28011-3459
c
print approvai
74
p: 800-969-0108
f: 610-916-9501