User manual

Polisher L 602VR
14
For your safety
Danger!
Before using the polisher, please read and
follow:
– these operating instructions,
– the “General safety instructions” on the
handling of power tools in the enclosed
booklet (leaflet-no. 315.915/04.04),
– the currently valid site rules and the
regulations for the prevention of
accidents.
This polisher is state-of-the-art and has
been constructed in accordance with the
acknowledged safety regulations.
Nevertheless, when in use, the power tool
may be a danger to life and limb of the user
or a third party, or the power tool or other
property may be damaged. The polisher
may be used only
– used as intended,
– in perfect working order.
Faults which impair safety must be repaired
immediately.
Noise
Caution
Wear ear protection at a sound pressure
above 85 dB(A).
Measured according to EN 50144:
:
Vibration
Weighted effective value of acceleration
according to EN 50144: 7 m/s²
Intended use
This polisher is designed
– is designed for industrial applications,
– for all types of polishing work with
polishing sponges, lambskins and
woolskins, felt plate, buffing disc
– for surface grinding with sanding sheet
on a backing pad
– for use with polishing and grinding tools
which are permitted to be used at
a speed of at least 2400 r.p.m.
Safety instructions
Danger!
n When using the power tool,
wear protective equipment:
Goggles, dust mask, ear protection,
protective gloves, sturdy shoes.
If required, also wear an apron!
n Always guide the polisher with both
hands.
Side handle (3b) or bail handle (3) must
be attached!
n Do not clamp the polisher in a vice.
n Always lay the power cord (5) to the rear
away from the polisher.
n Clamp the workpiece if it is not securely
positioned by its own weight.
n Use only tools which have a permitted
speed at least as high as the nominal
speed of the polisher.
n Note the dimensions of the tools. The hole
diameter must fit onto the clamping
without play or pretension. Do not use any
adapters or reducers.
n Store and handle grinding tools
according to the manufacturer’s
instructions.
Sound pressure L
PA
dB(A) 88
Sound power L
WA
dB(A) 101
LK602VV.book Seite 14 Mittwoch, 1. Februar 2006 11:23 11