User manual

Wall chaser MS 1706 FR
17
Operating instructions
Danger!
Before performing any work on the power
tool, pull out the mains plug.
Before switching on the angle
grinder
n Unpack the wall chaser and check that
no parts are missing or damaged.
Switch on and off
Caution!
Following a power failure, the switched-on
machine will start running again.
– Press the switch (9) and push forwards.
– Lock the switch by depressing it at the
front.
– To switch off the wall chaser, release the
switch by pressing it at the back.
Changing the cutting discs/
changing the groove width
Caution!
Risk of injury! Wear protective gloves.
1. Pull out the mains plug.
2. Lift the lock (5) for the guard hood and
rotate by 180°.
3. Remove the guard hood (3).
4. Press the spindle lock (12) and loosen
the quick-release clamping nut.
Danger!
Risk of injury and damage.
The direction of rotation indicated on the
cutting disc must agree with the direction-of-
rotation arrow on the gearbox (13).
MS1706FR.book Seite 17 Montag, 15. Mai 2006 11:26 11