User manual

Wall chaser MS 1706 FR
13
Contents
Symbols used in this manual . . . . . 13
Technical specifications . . . . . . . . . 13
Overview . . . . . . . . . . . . . . . . . . . . 14
Supplied components . . . . . . . . . . . 15
Operating instructions . . . . . . . . . . 17
Maintenance and care . . . . . . . . . . 21
Disposal information . . . . . . . . . . . . 21
CE Declaration of Conformity . . . . . 22
Guarantee . . . . . . . . . . . . . . . . . . . 22
Symbols used in this manual
Danger!
Denotes impending danger. Non-
observance of this warning may result
in death or extremely severe injuries.
Caution!
Denotes a possibly dangerous situation.
Non-observance of this warning may result
in slight injury or damage to property.
Note
Denotes application tips and important
information.
Symbols on the power tool
Before switching on the power
tool, read the operating manual!
Wear goggles!
Disposal information for the old
machine!
(See page 21)
Technical specifications
Machine type MS 1706 FR
Cutting depth mm 0–35
Groove width mm 10–30
Disc diameter mm 140
Tool holder M 14
Speed (at no load)
min
-1
7500
Power input W 1400
Power output W 950
Weight (without power cord) kg 3.7
Safety class
II /
MS1706FR.book Seite 13 Montag, 15. Mai 2006 11:26 11