Use and Care Manual
7
Apply Paste between threshold
and bottom of door.
Apply Paste between door and
the door frame (left & right).
Apply Paste along front and
corners of threshold.
Apply Paste where doorframe
meets casing and casing
meets wall.
Use gloved nger or Flex Gap
Filler tool to push Paste into all
seams/screw holes. Smooth out.
Use Paste to seal where lock set/
door handle meets door.
Cut a small square of Tape. Place Tape over keyhole to seal it. Completely cover the Tape
with Paste.
Use gloved nger to smooth
out Paste.
Brush Liquid on top of all areas
sealed with Paste.
Apply additional coats of Liquid
as necessary.
4
7
10
21
5
8
11
3
6
9
12