Use and Care Manual
13
Apply Paste between garage door
bottom and foundation.
Apply Paste to garage door sides. Apply Paste to sectional garage
door seams.
Use a gloved nger or our Flex
Gap Filler tool to push Paste into
all seams and smooth out.
Cut Tape into 2-ft sections. Remove backing and fold in half
horizontally.
Seal door to foundation with
Tape, pushing fold into seam.
Apply Paste to all Tape edges. Apply additional layers of Paste
over previous layers of Paste
and Tape.
Once dry, brush Liquid on top of
all previous applications.
Apply Liquid around door handle
and lock.
Apply additional overlapping
coats of Liquid, if needed.
4
7
10
21
5
8
11
3
6
9
12