Use and Care Manual

Clean area to be sealed. Apply Paste to all areas indicated

in yellow.

Push Paste into seams with

gloved nger or Flex Gap

Filler tool.

Apply Paste along front and

corners of threshold.

Apply Paste where doorframe

meets casing and casing

meets wall.

Place Tape over keyhole to seal it.

Completely cover tape with Paste

and smooth out with gloved nger

or other tool.

Cut Tape and apply to smooth

surfaces separated by a seam.

Pull o backing while smoothing

out Tape with gloved hand.

Use gloved hand, squeegee, or

credit card to remove air pockets,

creases, or wrinkles.

Apply an even coat of Paste on

top of Tape, overlapping edges.

Brush Liquid on top of all previous

layers of product.

*Dry times may vary based on temperature, humidity, and thickness of applied layers.