SDS

6. Accidental Release Measures
Keep people away from and upwind of spill/leak. Do not touch damaged containers or spilled
material unless wearing appropriate protective clothing. Ensure adequate ventilation. Local
authorities should be advised if significant spillages cannot be contained. For personal protection,
see section 8 of the SDS.
Stop the flow of material, if this is without risk. Dike the spilled material, where this is possible.
Cover with plastic sheet to prevent spreading. Absorb in vermiculite, dry sand or earth and place
into containers. Following product recovery, flush area with water. Clean surface thoroughly to
remove residual contamination. Prevent entry into waterways, sewer, basements or confined
areas. For waste disposal, see section 13 of the SDS.
Do not discharge into lakes, streams, ponds or public waters.
Personal precautions,
protective equipment and
emergency procedures
Methods and materials for
containment and cleaning up
Environmental precautions
7. Handling and Storage
Avoid contact with eyes, skin, and clothing.
Wear appropriate personal protective equipment.
Avoid breathing vapors or mists.
Provide adequate ventilation.
Avoid prolonged exposure.
Observe good industrial hygiene practices.
Wash thoroughly after handling.
When using do not eat or drink.
Store in original tightly closed container.
Store away from incompatible materials (see Section 10 of the SDS).
Keep out of reach of children.
Store locked up.
Precautions for safe handling
Conditions for safe storage,
including any incompatibilities
8. Exposure Controls/Personal Protection
Occupational exposure limits
Canada. Alberta OELs (Occupational Health & Safety Code, Schedule 1, Table 2)
Components
Type
Value
Tin, dibutylbis
(2,4-pentanedionato-0,0')-,
(OC-6-11)- (CAS
22673-19-4)
STEL
0.2 mg/m3
TWA
0.1 mg/m3
Canada. British Columbia OELs. (Occupational Exposure Limits for Chemical Substances, Occupational Health and
Safety Regulation 296/97, as amended)
Components
Type
Value
Tin, dibutylbis
(2,4-pentanedionato-0,0')-,
(OC-6-11)- (CAS
22673-19-4)
STEL
0.2 mg/m3
TWA
0.1 mg/m3
Canada. Manitoba OELs (Reg. 217/2006, The Workplace Safety And Health Act)
Components
Type
Value
Tin, dibutylbis
(2,4-pentanedionato-0,0')-,
(OC-6-11)- (CAS
22673-19-4)
STEL
0.2 mg/m3
TWA
0.1 mg/m3
Canada. Ontario OELs. (Control of Exposure to Biological or Chemical Agents)
Components
Type
Value
Silane, ethenyltrimethoxy-
(CAS 2768-02-7)
STEL
60 mg/m3
10 ppm
0.1 mg/m3
Tin, dibutylbis
(2,4-pentanedionato-0,0')-,
(OC-6-11)- (CAS
22673-19-4)
TWA
Page: 3 of 9
#29482
Issue date 23-July-2018