SDS

ASI 200
Revision Date:
27-Jan-
2022
_____________________________________________________________________________________________
Inhalation
Remove to fresh air.
Eye contact
Rinse thoroughly with plenty of water, also under the eyelids.
Skin contact Wash with soap and water. May cause an allergic skin reaction. In the case of skin irritation
or allergic reactions see a physician.
Ingestion
Rinse mouth.
Most im
portant symptoms and effects, both acute and delayed
Symptoms
Itching. Rashes. Hives.
Indication of any immediate medical attention and special treatment needed
Note to physicians
May cause sensitization in susceptible persons. Treat symptomatically.
5. Fire
-
fighting measures
Suitable Extinguishing Media
Dry chemical, CO2, alcohol-resistant foam or water spray.
Unsuitable extinguishing media
Do not scatter spilled material with high pressure water streams.
Specific hazards arising from the
chemical
Product is or contains a sensitizer. May cause sensitization by skin contact.
Hazardous combustion products Calcium oxides. Formaldehyde. Silicon oxides. Nitrogen oxides (NOx). Carbon monoxide,
carbon dioxide and unburned hydrocarbons (smoke).
Explosion data
Sensitivity to mechanical impact
None.
Sensitivity to static discharge None.
Special protective equipment and
precautions for fire
-
fighters
Firefighters should wear self-contained breathing apparatus and full firefighting turnout
gear. Use personal protection equipment.
6. Accidental release measures
Personal precautions, protective equipment and emergency procedures
Personal precautions Avoid contact with skin, eyes or clothing. Ensure adequate ventilation. Use personal
protective equipment as required. Evacuate personnel to safe areas. Keep people away
from and upwind of spill/leak.
Other information
Refer to protective measures listed in Sections 7 and 8.
Methods and material for containment and cleaning up
Methods for containment Prevent further leakage or spillage if safe to do so. Soak up with inert absorbent material
(e.g. sand, silica gel, acid binder, universal binder, sawdust).
Methods for cleaning up
Pick up and transfer to properly labeled containers.
7. Handling and storage
Precautions for safe handling
Advice on safe handling Handle in accordance with good industrial hygiene and safety practice. Avoid contact with
skin, eyes or clothing. Ensure adequate ventilation. In case of insufficient ventilation, wear
_____________________________________________________________________________________________
Page 3 / 10