SDS

Version: 1.0
Revision Date: 10/25/2019
SDS_US - RE1000030030
8/26
Biological Limit Values
Chemical Identity
Exposure Limit Values
Source
Benzene, methyl- (toluene:
Sampling time: End of shift.)
0.03 mg/l (Urine)
ACGIH BEL (03 2013)
Benzene, methyl- (o-Cresol,
with hydrolysis: Sampling
time: End of shift.)
0.3 mg/g (Creatinine in urine)
ACGIH BEL (03 2013)
Benzene, methyl- (toluene:
Sampling time: Prior to last
shift of work week.)
0.02 mg/l (Blood)
ACGIH BEL (03 2013)
Benzene, dimethyl-
(Methylhippuric acids:
Sampling time: End of shift.)
1.5 g/g (Creatinine in urine)
ACGIH BEL (03 2013)
Benzene, ethyl- (Sum of
mandelic acid and
phenylglyoxylic acid:
Sampling time: End of shift.)
0.15 g/g (Creatinine in urine)
ACGIH BEL (02 2014)
Benzene (S-
Phenylmercapturic acid:
Sampling time: End of shift.)
25 µg/g (Creatinine in urine)
ACGIH BEL (03 2013)
Benzene (t,t-Muconic acid:
Sampling time: End of shift.)
500 µg/g (Creatinine in urine)
ACGIH BEL (03 2013)
Appropriate Engineering
Controls
No data available.
Individual protection measures, such as personal protective equipment
General information:
Provide easy access to water supply and eye wash facilities. Good general
ventilation (typically 10 air changes per hour) should be used. Ventilation
rates should be matched to conditions. If applicable, use process
enclosures, local exhaust ventilation, or other engineering controls to
maintain airborne levels below recommended exposure limits. If exposure
limits have not been established, maintain airborne levels to an acceptable
level. If exposure limits have not been established, maintain airborne levels
to an acceptable level.
Eye/face protection:
Wear safety glasses with side shields (or goggles).
Skin Protection
Hand Protection:
No data available.
Other:
Wear suitable protective clothing. Wear chemical-resistant gloves, footwear,
and protective clothing appropriate for the risk of exposure. Contact health
and safety professional or manufacturer for specific information.
Respiratory Protection:
In case of inadequate ventilation use suitable respirator. Seek advice from
local supervisor.
Hygiene measures:
Observe good industrial hygiene practices. Wash hands before breaks and
immediately after handling the product. When using do not smoke. Do not
handle until all safety precautions have been read and understood. Obtain
special instructions before use. Wash contaminated clothing before reuse.
Avoid contact with skin. Contaminated work clothing should not be allowed
out of the workplace.
9. Physical and chemical properties