SDS

100% RTV Silicone - Standard Acetoxy
Section 2. Hazards identification
Response
:
IF ON SKIN: Wash with plenty of soap and water. Take off contaminated clothing.
Wash contaminated clothing before reuse. If skin irritation occurs: Get medical
attention. IF IN EYES: Rinse cautiously with water for several minutes. Remove
contact lenses, if present and easy to do. Continue rinsing. If eye irritation persists: Get
medical attention.
Storage
:
Protect from sunlight. Store in a well-ventilated place.
Disposal
:
Not applicable.
Hazards not otherwise
classified
:
None known.
Section 3. Composition/information on ingredients
Other means of
identification
:
Not available.
CAS number
:
Not applicable.
Substance/mixture
Product code
:
Not available.
CAS number/other identifiers
:
Mixture
There are no additional ingredients present which, within the current knowledge of the supplier and in the concentrations applicable, are
classified as hazardous to health or the environment and hence require reporting in this section.
Occupational exposure limits, if available, are listed in Section 8.
Any concentration shown as a range is to protect confidentiality or is due to batch variation.
Ingredient name
CAS number
%
Triacetoxyethylsilane
1 - 5
17689-77-9
ACUTE TOXICITY (oral) - Category 4
SKIN CORROSION/IRRITATION - Category 1B
SERIOUS EYE DAMAGE/ EYE IRRITATION - Category 1
Methylsilanetriyl triacetate
1 - 5
4253-34-3
ACUTE TOXICITY (oral) - Category 4
SKIN CORROSION/IRRITATION - Category 1C
SERIOUS EYE DAMAGE/ EYE IRRITATION - Category 1
1,1-Difluoroethane
1 - 5
75-37-6
FLAMMABLE GASES - Category 1
GASES UNDER PRESSURE - Liquefied gas
Pure Substance Classification
Immediately flush eyes with plenty of water, occasionally lifting the upper and lower
eyelids. Check for and remove any contact lenses. Continue to rinse for at least 20
minutes. Get medical attention.
Flush contaminated skin with plenty of water. Continue to rinse for at least 20 minutes.
Get medical attention. Wash clothing before reuse. Clean shoes thoroughly before
reuse.
Remove victim to fresh air and keep at rest in a position comfortable for breathing. If
not breathing, if breathing is irregular or if respiratory arrest occurs, provide artificial
respiration or oxygen by trained personnel. It may be dangerous to the person providing
aid to give mouth-to-mouth resuscitation. Get medical attention if adverse health effects
persist or are severe. If unconscious, place in recovery position and get medical
attention immediately. Maintain an open airway. Loosen tight clothing such as a collar,
tie, belt or waistband. In case of inhalation of decomposition products in a fire,
symptoms may be delayed. The exposed person may need to be kept under medical
surveillance for 48 hours.
Section 4. First aid measures
Eye contact
Skin contact
Inhalation
:
:
:
Description of necessary first aid measures
2/11