Getting Started Guide Advanced Telematics Tracker Made by: flex Model: FT700-LM0QGL/FT700-LM0QTE/FT750-L430-GL 0 | Rev 0.
In-Cab Advanced Telematics Tracker Safety Warnings Read this complete guide before installing the device. This device contains a Lithium Ion battery. If these guidelines are not followed, the battery may experience a shortened life span or may present a risk of damage to the device, fire and/or bodily injury. — Do not penetrate the battery or device with a nail etc., nor make a hole in the battery.
Multi-function Button The device has multi-functions in one button. It can be used to power on and off the device, force a manual sync with the device management server and to check for any error conditions.
» If the device was able to connect to the network and successfully received its unlock command, the power LED will now emit 3 sets of 4 medium flashes.
Record Device Information Record the following information for activation and for your records: » Device Product Name (see image of label below) » Device Model Name (see image of label below) » Device SN/IMEI (see image of label below) » Device ICC ID (if available) Pre-installation *Recommended tools and supplies for installation Basic Tools: • Wire Strippers • Connector Crimping Tool • Panel Removal Tool • Digital Multimeter (DMM) • T-10S Torx Screwdriver Basic Supplies: • Ring Terminals • Cable Z
tapping screws or cable zip-ties. Do not force or jam the device into tight places instead of mounting it. When mounting the Device, do not obstruct any serviceable areas such as fuse boxes, etc. The device and its wiring must be mounted away from any moving parts such as brake, gas, and clutch pedals and linkages. Installation *Identify correct wires 1.
CONNECTOR B (10- PIN FCI) CABLE COLOR TABLE : Pin no. Cable definition Color 1 Ground Black 2 12/24/48V Power in Red 3 CANH (2.0B or FD) / ISO-15765 or J1939 Gray/Green 4 CANL (2.0B or FD) / ISO-15765 or J1939 Gray/Yellow 5 RS-232 #1 TxD Orange 6 RS-232 #1 RxD Pink 7 12V Out (2.5W) Purple 8 Digital Input #1_ignition (Programable Bias) White/Yellow 9 Digital Input #2 (Programable Bias) White/Gray 10 Digital Input #3 (Programable Bias) White/Green *Chassis Ground Connection 1.
FCC Warning statements This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (l) This device may not cause harmful interference; and (2) This device must accept any interference received, including interference that may cause undesired operation. Suppliers Name: Flex Industrial, Ltd.
Declaraciones de advertencia del Instituto Federal de Telecomunicaciones IFT – México (For FT 700 Model) IFT (México): La operación de este equipo está sujeta a las siguientes dos condiciones: (1) es posible que este equipo o dispositivo no cause interferencia perjudicial y (2) este equipo o dispositivo debe aceptar cualquier interferencia, incluyendo la que pueda causar su operación no deseada.. __________________________________________________ BT POWER: 6.
