Getting Started Guide

5|Rev.0.1

duringcranking and while motor is running. Connect the device’s white/yellow wire here.
Connector cable color table:
Pin no. Cable definition Color
1 Ground Black
2
CAR_BAT_PWR_12V_24V (12/24/48V (EV) Power
in)
Red
3 Switched Input 1_CON (Ignition Detection) White/Yellow
4 Switched Output1 (Relay Control) Black/brown
5 RS232 TX1 Orange
6 RS232 RX1 Pink
7 1-wire_Line Yellow
8 12V_DC_OUTPUT (Switched power out) Purple
9 CAN_H1_CON (CANH (2.0B) / ISO-15765 or J1939) Blue
10 CAN_L1_CON (CANL (2.0B) / ISO-15765 or J1939) Gray
11 RS232_TX2 (RS232 #2 TX) Gray/Pink
12 RS232_RX2 RS232 #2 RX) Gray/Brown


*Chassis Ground Connection
1. Connect the device’s ground wire (black) to vehicle’s chassis.